Networking Presentations
When the VPL-FE40 projector is installed on a LAN via RJ45, presentations can be projected from any PC on that network whether connected via a LAN cable or wirelessly. "New feature" High-Speed Image Transfer over IP Networks: Because the VPL-FE40 projector employs efficient compression and transmission techniques, they can receive and project images via IP networks for effective presentations from any networked PC.

Monitor Out
The VPL-FE40 projector can display the image simultaneously on a large screen and on an additional monitor (via a 15-pin D Sub connection), so that the user can face the audience and still see the information being shown.

Low Fan Noise
For an undisturbed presentation, quiet operation is very important. The noise level of the VPL-FE40 is 28dB in low mode which is considered less than a whisper.

RS-232C
Connections include an RS-232C port for control of the projector.

Password Protection
When this function is activated a password is required to use the projector (if the password is lost, Sony is able to retrieve it).

Control Panel Lock
This function locks the controls on the top and side of the projector, to prevent unauthorised or unintentional use of the controls. Functionality can be switched "on" or "off".

Off and Go
No cool down time needed, just switch off and pack away! The fan continues to cool the VPL-FE40 after the power supply is removed, enabling users to unplug the projector immediately after use, without damaging the lamp or optics. Other projectors need to remain connected to the power supply to cool the projector after use.

Direct On / Off
Ceiling mounted projectors notoriously remain on after the meeting concludes and the attendees leave the room which in turn burns unnecessary hours on the lamp and electricity. The VPL-FE40 can be set to skip the standby mode, so that it can be turned on / off directly using a main switch.

Power Zoom/Focus/Picture Shift (Horizontal and Vertical)
The Zoom, Focus, and Horizontal and Vertical Picture Shift functions available with the projectorâ¿¿s supplied power-operated lens and optional lenses (except VPLL-1008) can be controlled both from the projector control panel and the supplied Remote Commanderâ¿¢ unit. Images can be easily adjusted to the desired settings both during installation and when the projector is in use.

ID Function for Multi-Projector Installation
Multiple Projectors, one Remote Commander! VPL-FE40 projectors have a built-in ID function, so each projector can be controlled independently from a single Remote Commander unit.

ECO INFO
Halogenated flame retardants are not used in cabinets or printed wiring boards.
Corrugated cardboard is used for the packaging cushions.
Standby power consumption: 0.5 W.

Accessories for Sony VPL-FE40

Model Name	Description
PCSG70N	4 Mbps High-End Vcnf System With camera
LMPF270	Replacement Lamp For VPL-FE40, VPL-FE40L, VPL-FX40 and VPL-FX40L
PCSG50	Video Communication System
PSS610//A	Projector Suspension Support
VPL12K/RSEW4	4Yr Ext Warr, VPL Proj w/ up to $12K List
VPL12K/RSEW5	5Yr Ext Warr, VPL Proj w/ up to $12K List
VPL12K/RSOT3	3Yr VPL Proj OTS Pgm w/up to $12K List
VPL12K/RSOT4	4Yr VPL Proj OTS Pgm w/up to $12K List
VPL12K/RSOT5	5Yr VPL Proj OTS Pgm w/up to $12K List
VPLL1008	Option Lens For VPL-FE40L/FX40L Installation Projectors
VPLLZ1024	Option Projection Lens for VPL-FE40L /VPL-FX40L Projectors
VPLLZ1032	Option Projection Lens for VPL-FE40L and VPL-FX40L Installation Projectors